Kitamura HX250iF horizontal machining center, 4th axis
complete with tool holders and clamping systems
Table Work area (width x length) 254 x 254 mm
Table Indexing B-Axis 0.001◦
Max. Work Size Ø 350 x 400 mm
Load Capacity 100Kg
X Axis 305 mm
Y Axis 305 mm
Z Axis 330 mm
B Axis 360◦
Distance from Table surface to spindle center 60 ~ 365 mm
Distance from Table center to spindle nose 60 ~ 390 mm
Spindle Taper BT30
Spindle Speed 150 – 15,000 min -1
Rapid Feed X,Y And Z Axis (Auto) 48,000 mm/min
(Manual) 15,000 mm/min
Cutting Feed X, Y And Z Axis 0-15,000 mm/min
Auto Tool Changer (ATC)
Tool Storage Capacity 40 Tools
Tool Selection Method Random, Tool Identified at Magazine
Tool Shank MAS BT30
Max. Tool Size Ø 50 x 200 mm
-Two neighboring tool pots should be empty Ø 75 x 200 mm
Max. Tool Weight (with tool holder) 2Kg
Tool Change Time 1.2 Second
Spindle Motor (12 min. Ratio) AC 7.5 KW (AC 10 HP)
(Continuous Operation) AC 5.5 KW (AC 7.4 HP)
Coolant Motor AC 0.73 KW (1.0 HP) (50 Hz)/1.21 KW (1.6 HP) (60 Hz)
ATC Motor AC 0.4 KW (AC 0.54 HP)
Lubrication Motor AC 5 W
Fanuc 18iMB CNC Control,
Full 4th Axis (.001 Degree ) Programmable Pallet Index,
Daikin Chiller,
High Pressure Thru-Spindle Coolant,
Rear Discharge Chip Conveyor Remote Jog Handweel,
Helical Interpolation, Non-Contact Tool Measurment Probing (Length, Diameter, Corner Radius)
Machine Weight 4,600 Kg
Coolant Through Spindle
Chip Conveyor
Full 4th Axis Table
Including clamping systems, vices
Including tool holders and tools
Under power in our warehouse, possible to test it anytime!