INDEX MS22-8
1 INDEX C200-4 D SL control
2 NCU
- Number of spindles 8
- Bar diameter 22mm
- Spindle power 15 kW
- Spindle speed 10,000 rpm
Control INDEX C200-4 D SL controller
With IEMCA SIR Bar Feed (10ft)
1 Pickup Attachment
- Number of spindles 8
- Bar diameter 22mm
- Spindle power 15 kW
- Spindle speed 10,000 rpm
- 1.1 Slide units X and Z axes controlled by CNC
- 1.2 slide units X and Z axes controlled by CNC
- 2.1 slide units X and Z axes controlled by CNC
- 2.2 slide units X and Z axes controlled by CNC
- 3.1 slide units X and Z axes controlled by CNC
- 3.2 slide units X and Z axes controlled by CNC
- 4.1 slide units X and Z axes controlled by CNC
- 4.2 slide units X and Z axes controlled by CNC
- 5.1 slide units X and Z axes controlled by CNC
- 5.2 slide units X and Z axes controlled by CNC
- 6.1 Slide units X and Z axes controlled by CNC
- 6.2 slide units X and Z axes controlled by CNC
- 7.1 Slide units X and Z axes controlled by CNC
- 7.2 slide units X and Z axes controlled by CNC
- 8.1 slide units CNC-controlled swivel axes and Z-axes
- 8.2 slide units X and Z axis controlled by CNC
- 1 set of draw collet holders
- 1 bar loading magazine IEMCA SIR MS 22.8/33/F bundle with drilling station
- 1 synchronous spindle in SL 8.1 with flushing and ejector as well as jaw chuck
- Back drilling station for 3 fixed tools in SL 7.1 or 8.2
- 1 workpiece removal through a chute in SL 8 with a conveyor belt within the machine
- 1 preparation for air/oil lubrication for drive devices
- 1 electrical preparation, double module for SL 1,2,3 and 4 with electronic shaft
- 1 electrical preparation, double module for SL 5,6,7 and 4 with electronic shaft
- 1 flap for suction
- UNICOOL EA interface - UNIMESS interface
- 16 freely programmable inputs and outputs
- CO2 fire extinguishing system
- Hinged belt conveyor
- High pressure pump 80 bar
- Preparation for central cooling water supply
- 6 double holders
- 6