Operating voltage 380 V
Frequency 50 Hz
Connection 11 kVA
Rated current 30 A
Control unit FANUC SERIES 32i-MODEL B
Table dimensions 550 x 200 mm
Magnet dimensions approx. 320 x 200 mm
Table travel 600 mm
Height of the wheel spindle center from the table surface 90 - 400 mm
Standard size of the permanent electromagnetic chuck 400 x 200 x 100 mm
Height of the table work surface from the floor 1000 mm
Max. Load mass on the table (including chuck) 150 kg
Table (W-axis)
Traversing speed
Feed back and forth 1 - 40 m/min
Creep feed (optional) hydraulic creep feed:
Low 10 - 200 mm/min
High 10000 mm/min
Automatic feed drive system hydraulic cylinder with servo valve and magnetic scale
Speed of the back and forth movement min. 250 (with 15 mm stroke)
Position detection system/resolution Magnetic scale/0.001 mm saddle (X-axis):
Cross feed speed
Jog feed 0 - 400, 500, 1000 mm/min
Rapid traverse 2000 mm/min
Grinding feed 0.1 - 1000 mm/min
Position detection system/resolution Linear scale/0.00005 mm
Wheel head (Y-axis)
Vertical feed speed
Jog feed 100, 1000 mm/min
Rapid traverse 2000 mm/min
Grinding feed 0.1 - 1000 mm/min
Least programmable unit 0.0001 mm
Position detection system/resolution Linear scale/0.00005 mm
Grinding wheel size 4205 x 6.4 to 25 x 31.75 mm
Wheel spindle speed 500 - 5000
Mass of the hydraulic unit (without hydraulic oil) 120 kg
Wheel spindle motor 2.2 - 2 kW-p
Hydraulic pump 1.5 - 4 kW-p
Cross feed servomotor (X-axis) 1.0 kW
Automatic lubrication pump 5 W
Standard magnet dimensions 400 x 200 x 100 mm
Grinding wheel diameter approx. 150 mm
Incl. one grinding wheel, CDs and documentation