VTL

Buy Used VTL from CKD Blansko of year - 1977, Model - SK-50A

SKU : 2408510

I am a dealer

Subscribe for similar machines

Table Diameter 4,750 mm
Swing 5,791 mm
Height 3,050 mm
Table Load Capacity 45,359 kg
Control System Siemens 828D
Distance Between Columns 5,182 mm
Side Head Horizontal Travel 1,250 mm
Main Motor Power 74.6 kW
Machine Weight 125,645 kg
Additional Information
Cross Section of Cutting Tool 57.15 mm x 57.15 mm
Number of Crossrail Tool Heads 2
Number of Side Heads 1
Note Side head ram is adapted for accommodation of clamping tools.
Number of Chuck Jaws 4
Equipment For turning tapers & cutting threads using change gears with right-hand tool head on cross-rail.
Width of T-Slots in Table 35.8 mm
Distance Between Table Center & Column Edge (Inclined Plane Approx.) 2,642 mm
Distance Range Between Table Center & Toolholder of Side Head 1,295 mm to 2,540 mm
Max Lowering of Center of Side Head Ram Below Table 240 mm
Diameter Range of Workpieces that Can Be Clamped by Jaws 725.97 mm to 4,565.38 mm
Rate of Crossrail Adjustment (Approx.) 610 mm/min
Horizontal Movement of Sidehead Ram 1,251 mm
Horizontal Movement of Cross Rail Toolhead (Measured from Machine Center to Center of Ram Adjusted to its Extreme Outer Position Approx.) 19.94 mm to 2,868 mm
Number of Feeds to Cross Rail Toolhead 14
Number of Feeds to Sidehead 14
Vertical and Horizontal Rapid Feed Motions to Crossrail Toolhead 711 mm/min
Vertical and Horizontal Rapid Feed Motions to Sidehead 711 mm/min
Power-Operated Swiveling of Cross Rail Toolheads 16 rpm
Electrics 440V / 3-phase / 60 Hz (Normal Running Load: 280 amps)

RECENTLY VISITED MACHINES